The
News and Happenings of Aerofit, Inc.
·
August 2008
·
In an ongoing effort to upgrade and modernize our machining
capabilities and
capacity, we are adding six additional Okuma Heritage ES-L10
machining
centers. Three were received in June,
two more arrived the first week of
August and an additional one will arrive in September.
·
July 2008
On July
31, 2008 Aerofit received Nadcap approval for
Non-Destructive
Testing specific to its new line for “fluorescent penetrant inspection”
of forgings and parts machined from
forgings. This is an example of
another event in a series by Aerofit
to maintain quality and delivery
integrity.
·
July 21, 2008
On July
21st Aerofit, Inc. took delivery of a fourth Wasino turning center.
·
July 2008
We are
pleased to announce the appointment of Mr. Peter Lewis to the
Aerofit, Inc. team. Peter will have
responsibility for both the
and
provide technical assistance and
support to the Aerofit network of
representatives and customers worldwide.
·
May 2008
On May 15, 2008 Aerofit, Inc. took delivery on their second
Kitamura CNC Mill.
This additional mill not only increases our capacity, it also
improves and
expands our machining capabilities.
·
September 2007
Aerofit, Inc. has accepted delivery of another brand new
Center. This addition
continues the plan of Aerofit, Inc. to service our customers
by increasing capacity and reducing leadtimes.
·
August 2007
The
fourth Okuma Twin Star LT200-M has been delivered and is in place on the
floor at Aerofit. This new addition to our equipment list
continues to support
industry capacity requirements.
·
June 2007
Aerofit, Inc. has taken receipt of a new
The reliability and high speed of this machine enhances our
capacity as well
as offers improved capability to meet our commitment to
producing machined
parts.
·
May 2007
Aerofit, Inc. continues to increase capacity with the addition
of a
Model 52, six spindle screw machine. It is shown here as it is delivered to
Aerofit, Inc. the week of 21 May, 2007.
·
Aerofit is pleased to announce the VIP
recognition from Bombardier Aerospace
Aerofit
successfully completed the Vendor Inspection Program this spring.
Pictured
are Jordan Law, Francisco Lopez, Bill Younkin and Dave Werner
·
Aerofit Completes NADCAP
Reaccreditation
Aerofit has obtained reaccreditation to Nadcap standard AS7112
Distribution
Systems. Aerofit
strongly supports the Nadcap process, and has been
Nadcap certified since 1998, when AS7112 was first
released.
·
February 2007
Shown
here is one of four new ES-L10II CNC
Lathes that were delivered to
Aerofit on 5 February 2007.
This is the first acquisition of new equipment
ordered for delivery this year.
·
December 2006
Aerofit
Inc. continues to add processes to better serve the market. In
January of 2007 our brand new dye penetrant
inspection line will be
operational.
·
November 2006
Shown in this photo is the second of the brand new Okuma LT200
Twin
Spindle Turret Machining Centers being positioned on our shop
floor. The
addition of this equipment is in our continuing support of
customer
requirements.
·
October 2006
Aerofit continues to increase its capacity with the
acquisition of a brand new
Okuma Twin Star LT200.
·
August 18, 2006
Aerofit has received three more brand new Okuma Heritage
ES-L10II CNC
Turning Centers. They are
shown here in their placement on our shop floor
in a cell configuration.
·
August 2006
Aerofit is pleased to receive the
first of four brand new, Okuma Heritage
ES-L10II CNC Turning Centers, seen
here being unloaded and positioned
on
the shop floor. Not only will these
machines increase our capacity,
they
will add to and compliment the flow of products through our facility.
·
May 2006
Aerofit
has taken delivery of a Two Axis Gang style CNC Lathe and
a Standard Two Axis CNC Lathe.
These new pieces of equipment, seen being delivered in these
photos,
will help Aerofit, Inc. further service the requirements of
our customers.
·
March 2006
Aerofit has been awarded the Northrop Grumman Platinum
Level
Source Award
Aerofit, Inc. has been recognized for its high level
of quality and delivery performance as a Northrop-Grumman Integrated Systems
supplier. Aerofit has been empowered by
Northrop-Grumman to act on behalf of Integrated Systems in conducting final
acceptance of Aerofit products designed as Platinum Source by Purchase Order.
·
December
2005
We recently sent out an announcement pertaining to the relocation of our company. We have received several questions and this letter is an attempt to answer them.
- The company was moved approximately five miles, from
- All of our 117 employees transferred to the new facility.
- We moved from six small buildings, totaling 47,000 square feet, to one building, totaling 67,000 square feet.
- The only change to any of our equipment was the necessity to have them all re-certified to the latest UL standards.
- We continue to manufacture the same line of products, on the same equipment, using the same methodology.
- Our management direction and leadership remains the same.
- With the exception of the above noted FAX number all of our phone numbers, including the area codes, and email address remain the same.
Having said that, it is our belief that our new facility offers an opportunity to not only increase our capacity and product offering but to also re-engineer many of our business processes with the goal of becoming a more valuable and stable supplier to the Aerospace, Marine and Nuclear industries.
As with any move there have been some unexpected delays but, we have had an exceptional team of employees and consultants who have immediately addressed each situation and resolved them.
We hope this answers most of your questions however, if you have additional questions or any other concerns please feel free to contact us.
Regards,
|
Jordan Law |
Dave Werner |
|
Co-Owner |
Co-Owner |
|
(714) 228-7609 |
(714) 228-7604 |